Topcom POWERLAN 6420 MINI Schnellinstallationsanleitung Seite 8

PowerLan 6420 mini
5 Connecting the PowerLan 6420 mini plugs
By default, the PowerLan 6420 mini plugs are not connected.
To connect them with each other, follow the procedure set out below.
1. Plug all the Powerlines into the power socket.
2. Push down the (reset/simple connect) key on the first Powerline plug
for two seconds.
The power-supply LED will flash slowly (0.5 seconds on/0.5 seconds off).
3. Within two minutes, push down the key on the second plug.
The connection sequence starts.
A random password will be exchanged between the Powerlines.
Once the connection is complete, restart both plugs and the
Powerline LEDs on both plugs will light up.
6 Adding an additional PowerLan 6420 mini
A Powerline network can be created with up to a maximum of eight
Powerlines. If you already have two Powerlines in operation, you can
add a maximum of six.
To add a Powerline, follow the procedure set out below.
1. Plug the extra Powerline into the power socket.
8
The easiest way is to plug them in next to
each other in the same place. Once they
have been successfully connected, you can
put them in the desired location.
Push down the reset/simple connect key for at least
12 seconds to restore the PowerLan 6420 mini
factory settings. When the factory settings are
restored, the PowerLan 6420 mini plug will need to be
reconnected!