Product Introduction; Front View; Rear View; Connections - Seg 55 cm (21.5”) LED BLU-TV Portofino Bedienungsanleitung

Product Introduction

Front View

MENU CH- CH+ VOL- VOL+ SOURCE
Remote Control window(keep clear)
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED indicator: Press POWER to turn on and off.
Indicator on(Red)
Indicator on(Green)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.

Rear View

Wall Mounting
The TV is provided with mounting holes for a VESA approved wallmounting bracket (NOT SUPPLIED).
Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the
basemounting bracket).Mount the VESA bracket using 4xM4x10mm ISO metric threaded screws (not
supplied). Do not use screws longer than 10 mm, it will occur damage to the internal parts. Fit the wall
bracket securely following themanufacturers instructions.
55 cm (21.5") LED BLU-TV Portofino
POWER
LED indicator
Standby mode
Power on mode
0
to the left or right side and 20
MENU: Display/exit the OSD menu.
CH+/-: Scan through channels.
VOL+/-: Adjust the volume.
SOURCE: Display the input source menu.
: Play/pause the disc playing.
: Eject the disc.
POWER: Turn on/standby the TV set.
DVD: Insert a 12cm disc according to the
silk.
0
above or below the control

Connections

See next page
5