Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Ordering Replacement Parts - EINHELL 41.327.20 Betriebsanleitung

Druckluft-werkzeugset
Vorschau ausblenden Andere Handbücher für 41.327.20:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Anleitung_4132720_SPK1:_
3. Quick-release coupling
Connect
Push the nipple on your compressed air hose into
the quick-release coupling, the sleeve will automati-
cally spring forwards.
Disconnect
Pull back the sleeve and remove the hose.
Important. As you release the hose coupling,
hold the hose coupling part in your hand to pre-
vent injuries caused by the hose being thrown
backwards.
The compressed air hose is also fitted with a quick-
lock coupling to which accessories can be connected
as described above.
4. Instructions for the 5-piece
accessory set
For information on the correct use of the acces-
sories, please refer to the following overview.
Compressed air hose
For connecting to a compressed air source.
Blow-out pistol (Figure 1)
Working pressure in bar: 3-8
Use the compressed-air gun (2) in combination
with the nozzle (5) as a blow-out pistol (see Fig.
1, 6).
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning
soiled equipment.
The infinitely variable trigger lever allows an
exact dosing of compressed air.
Tire pressure gauge (Figure 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to inflate
tires easily and exactly. Use the pressure gauge
to check the tire pressure. If the tire pressure is
too high, you can reduce the pressure with the
integrated relief valve (b).
After filling with air, please check the set tire pres-
sure with a calibrated gauge, for example at a
petrol station.
14.12.2011
10:48 Uhr
Seite 7
Paint spray gun with cup (Figure 3)
Working pressure in bar: 3-4
Range of applications:
The pain spray gun is ideal for all small scale
priming and painting work.
The adjustment of the air and paint volumes
helps to achieve outstanding results.
The paint spray gun, with an infinite adjustment
from wide to round jet, is ideal for both large
areas and for corners and edges.
Spray gun with suction-feed can
(Figure 4)
Working pressure in bar: 3,5
Use the compressed-air gun (2) in combination
with the suction-feed can (6) as a paint spray gun
with suction-feed can (see Fig. 1, 5).
Range of applications:
Suitable for spraying cold cleaner, spray oil, etc.
The infinitely variable trigger lever allows an
exact dosing of the spray material.
The rotating nozzle (c) allows you to adjust the
ratio of fluid to the volume of air.
Tip: Before starting work, you should conduct a
small test on newspaper to find the ideal settings
for achieving perfect results.

5. Cleaning and maintenance

5.1 Cleaning
We recommend that you clean the appliance
immediately after you use it.
Clean the accessories after use with a suitable
cleaning agent (observe the instructions on the
working materials).

6. Ordering replacement parts

Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Druckluftset profi

Inhaltsverzeichnis