Safety Features; Cleaning And Maintenance; Données Techniques - EUROM EK2001 Bedienungsanleitung

is constantly moved, allowing the heater to accurately detect if the area is cooling down.
The thermostat dial is continuously adjustable. A higher temperature is set by turning it clockwise; a lower
temperature by turning it anticlockwise.

Safety features

In case of internal overheating, the overheating safeguard will switch the heater off. If this occurs, immediately
turn the mode selector dial to O, unplug and allow heater to cool down for at least 10 minutes. In theory, the
heater can now be used as normal. There is, however, generally a reason for an appliance overheating. This may
be because the heater cannot adequately release its heat or take in fresh air (because the heater is covered, the
grills are blocked, the heater is placed too near a wall etcetera). Before using the heater again, therefore, remove
or adjust whatever caused the appliance to overheat. If you cannot find the cause and overheating recurs, stop
using the heater and contact your vendor or a certified electrician for inspection/repair. Overheating poses a
serious fire risk!

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these
should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool
down before cleaning or carrying out maintenance work..

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,
sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

Use a vacuum cleaner or compressor to carefully remove any dust and dirt from the grills and ensure that
the air intake and outlet openings are clean. Be careful not to touch or damage any internal parts during
cleaning!

The heater contains no other parts which need maintenance.

At the end of the season, store the cleaned heater in the original packaging if possible. Store upright in a
cool, dry and dust-free place.

Do not dispose of the heater with household waste when it becomes worn or damaged beyond repair. Take
it to your local authority's collection point for electrical appliances where any reusable materials will be
collected and redistributed.
CE-statement
Euromac bv., Genemuiden-NL hereby declares that the EUROM workspace heaters, type EK2001 complies
with the LVD guideline 2006/95/EC and the EMC guideline 2004/108/EC and meets the following standards:
EN 60335-1:2002+A11, A1:04+A12, A2 :06
EN 60335-2-30:2003+A1 :04+A2 :07
EN 50366 :2003+A1 :06
Genemuiden, 28-04-2011
W.J. Bakker, alg.dir.
-----------------------------------------------------------------------------
Données techniques
Type
Tension
Puissance max.
Possibilités de réglage
Classe d'isolation
Dimensions
Poids
EK2001
Volts/Hz 230 / 50
Watts 2.000
Watts 0-650-1300-2.000
IP44
cm 21,0 x 19,7 x 30,3
kg 4,2 kg
EN 55014-1:2006
EN 55014-2:1997/+A1 :2001
EN 61000-3-2:2006
EN 61000-3-3 :1995/+A1 :2001/+A2 :2005
Français
12