Using your Induction hob
6.2 When you have finished cooking
1. Touching the heating zone selection control that you wish
to switch off:
2. Turn the cooking zone off by touching the slider
to the left. Make sure the display shows"0"
3.
Turn the whole cooktop off by touching the
ON/OFF control.
4. Beware of hot surfaces
An „H" appears on the display, which means that the hob
is too hot to touch. It will disappear when the surface has
cooled down to a safe temperature. It can also be used as an
energy-saving function, if you want to heat further pans - use
the hot plate, which is still hot.
6.3 The booster function
You can use the booster function to maximize the power of
a zone for a certain time.
Activate the boost function
1. Touch the button for the specified cooking zone.
2. Touch the boost control button.
The zone indicator will display „P" - the power setting will be maximized.
Cancel the boost function
At first, touch the target zone button. Then touch the boost control
again or pull the slider to your target power.
!
37