Select Source; Connect External Devices - AEG CTV 2206 LED-DVD-DVB-T Bedienungsanleitung

ENGLISH
72

4.6 Select Source

5. Connect External Devices

Your TV set features a variety of connectors for different devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT! Ensure that your TV set and all devices to be connected are turned off before connection. Observe the user
manuals of devices to be connected.
SCART Connector
Good quality analogue image and sound signals are transmitted via the SCART connector on the left hand side of the
device. Connect here devices such as VCR, satellite receiver, game console or Pay-TV decoder.
• Connect the Scart adapter cable to the SCART connector on the TV set.
• Connect the device via the full-featured SCART cable with the Scart adapter cable jack.
• In the source menu (press SOURCE button) select SCART.
NOTE: Switching voltage
When an external device is switched on, the switching voltage is activated. This ensures that the TV automatically
switches to the SCART input. (Only when a fully wired SCART cable is used.)
• When the externally connected device is switched OFF, the switching voltage is also switched off. The TV set then
always switches to ATV mode depending on its design.
VIDEO Connectors
You can connect e.g. a video camera via the RCA jacks L and R and the AV jack on the back of the unit.
• Connect the device via RCA cable to AV, L and R.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and audio R = red).
• Select signal input AV in the source menu (press SOURCE button).
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with PC AUDIO on the TV set.
• In the source menu (press SOURCE button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD recorder
in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors AUDIO L and R on
the TV set.
• In the source menu (press SOURCE button) select YPbPr.
HDMI- Input
Digital video and audio signals from an external device are transmitted in high quality via the HDMI ports.
• Use an HDMI cable (not supplied) to connect the HDMI output of the external device with the HDMI input on the TV
set.
1. In on mode press the SOURCE button. The source menu (connected devices) is dis-
played.
2. Press the arrow buttons / on the remote control or CH +/- on the device to select
the desired source.
3. Press OK or VOL +/- on the device to confirm.
NOTE:
Press the EXIT button to exit the menu without changes.