Pvr Recording And Time Shift Function (Only In Dtv Mode) (Optional); Pvr Settings - AEG CTV 2206 LED-DVD-DVB-T Bedienungsanleitung

Save Programmes
EPG allows you to save the programme start. The programmes are displayed in the schedule list. In on mode 10 seconds
before programme start a promt is shown asking you to switch channels. If no button is pressed or if you press
confirm the channel is switched. Press
1. Press the EPG /
button to open the EPG window.
2. Press INDEX and then press / to select CHANNEL (1).
3. In CHANNEL (2) press / to select the channel.
4. Press / to select the desired programme.
5. Press the blue button.
6. In the next window confirm the values with OK or change the values. The recorder schedule list with all saved
programmes is displayed.
7. Press EXIT to close the window.

9. PVR Recording and Time Shift Function (Only in DTV Mode) (optional)

Important! Before recording the media must be formatted. Existing files are deleted. Check to make sure that no impor-
tant information is saved on the media. Format the media according to "9.1 PVR Settings" ( see page 77).
NOTE:
PVR recordings are saved in .ts format to the USB device and can only be played back on this TV set. Playback on com-
puter, DVD player, etc. which do not support .ts format is not possible.

9.1 PVR Settings

1. Press the TV MENU button to display the OSD main menu.
2. In the main menu select OPTION, press
• Select Disk
Not applicable for this device.
• Check PVR File System
Check the connected USB device. Press OK to check the PVR file system.
NOTE:
Depending on the USB media's storage capacity, the check can take a little while. Do not press any buttons during
the check.
• USB Disk
Here the file system check status is displayed.
• Format
Press OK to format the disk.
CAUTION Existing files are deleted!
Connected PVR media must be formatted! The device writes specific files to the disk.
The window on the right is displayed. Select between "FAT 32" and "Hi Speed" for-
matting.
• Press / to select the desired formatting mode.
• Press OK to confirm. A security prompt is displayed.
• Press to start formatting. The USB device is now formatted and the PVR files
are created.
NOTE: This can take several minutes according to disk capacity.
If you have selected "Hi Speed" formatting, a window for setting the time shift size appears.
• Press / to select the desired Time Shift Size (size between 512 MB....All).
to stay with the current channel.
to select PVR File System and press OK.
ENGLISH
77
to