Options; Acoustic Signals; Before First Use - AEG FAVORIT 78000 VI1P Benutzerinformation

24 www.aeg.com

5. OPTIONS

Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 ÖKO PLUS
This option decreases the temperature
in the last rinse phase.
The use of this option decreases the en-
ergy consumption (up to 25%) and the
programme duration.
The dishes can be wet at the end of the
programme.
5.2 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are
off.
The programme duration can increase.
• Press Multitab, the related indicator
comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the wa-
ter hardness in your area.

6. BEFORE FIRST USE

1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
5. Adjust the released quantity of rinse
aid.

5.3 Acoustic signals

The acoustic signals operate when the
appliance has a malfunction, when the
adjustment of the level of the water soft-
ener occurs and when the programme is
completed.
By default, the acoustic signals are on,
but it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time,
button and button
indicators of buttons
start to flash.
3. Press button
•
The indicators of buttons
go off.
• The indicator of button
ues to flash.
• The display shows the current set-
ting.
4. Press button
ting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
the water softener. Contact your local
water authority to know the water
hardness in your area.
until the
, and
.
and
contin-
Acoustic signals
on.
Acoustic signals
off.
to change the set-