Spypoint Modell IR-5 Bedienungsanleitung Seite 25

25
SETTINGS
Date, Time and Picture Quality
Turn « OFF » your camera; set switch « MODE » to « SET/
TEST » and turn « ON » the camera. Press « MENU/OK ».
An « H » will flash on the screen indicating that the camera is
in High Resolution (5 MP). Use the « DOWN » button if you
want to reduce the resolution to « L » (3 MP). Press « MENU/
OK » to set the date and time. (mm/dd/yy, hh/mm) Use
« UP » and « DOWN » to change the blinking digit. Once
finished, press « MENU/OK » and turn « OFF » the system to
save the changes.
MODE
When the « PHOTO » or « VIDEO » mode is selected, the
test light in the front of the camera flashes for 60 seconds to
allow the user to leave without being photographed or filmed.
When the « SET/TEST » mode is selected, no picture or video
is recorded. When
Walk perpendicularly in front of the camera.
the camera detects movement, the light winks to indicate that
normally, a photo or video would be recorded.
If the system does
not detect the movement, increase the distance detection using the
« DISTANCE »
wheel or realign the system differently. When you
understand how the device responds to detections, you can better
When the
adjust the direction or the height of the installation.
switch is set to « VIEW », you can view the recorded pictures
or videos on television.
DELAY
To select the time interval before the camera records another
photo or video. This option prevents from taking too many
photos or videos.
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a
10 second delay between each photo. This option allows
up to 4 pictures from different angles when the camera is in
« PHOTO » mode.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in « VIDEO » mode.