Auto Tuning; Auto Channel Scan Menu Operation - Schaub Lorenz 32LT581CT Bedienungsanleitung

Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. After selecting
Direct, another menu screen will be displayed.
Select an available satellite and press OK to scan
for services.
Unicable: If you have multiple receivers and a
unicable system, select this antenna type. Press OK to
continue. Configure settings by following instructions
on the screen. Press OK to scan for services.
A02_[GB]_MB70_5112UK_DVBT_C_S2_32884W_GOLD11_10076633_50207316.indd 67 A02_[GB]_MB70_5112UK_DVBT_C_S2_32884W_GOLD11_10076633_50207316.indd 67
DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. After
selecting DiSEqC switch, another menu screen will
be displayed. You can set four DiSEqC options (if
available). Press GREEN button to scan all satellites
or press YELLOW button to scan only the highlighted
satellite. To save and exit press OK button.
When there is a short circuit in LNB, "Tuner
Overload" message is displayed on the screen, in that
case, please remove your satellite cable immediately
from your TV set.

Auto Tuning

HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
Press "MENU" button on the remote control and
select Installation by using " " or " " button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using "
"/" " button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using " "/" " and OK buttons.

Auto Channel Scan Menu Operation

Digital Aerial: Searches and stores aerial DVB
stations.
English - 67 -
07.12.2011 13:49:37 07.12.2011 13:49:37