Seg LED2400 Bedienungsanleitung Seite 48

Menu Settings (continue d )
Programme Edit
Press the OK button to enter the Programme Edit menu
as below.
Delete:
Select a channel and press the RED button to delete it.
Move:
Select an ATV channel, and press the YELLOW button,
then you use buttons to change the position of the
programme, press YELLOW again to confirm the change.
Press menu to exit and your new changes will be saved.
Skip:
Select a channel and press the BLUE button, this will
label the channel. As long as the channel has a skip label it will
be skipped when searching through the channels using the
CH+/- buttons.
Rename:
Select an ATV channel and press the GREEN button
to change the name of the channel by using the
FAV:
Select a channel and press or button to add this
channel to favourite lost.
Signal Information
Displays the digital TV-signal information (DTV mode only).
CI Information
Please contact your "pay perview" provider who can supply a
viewing card and cam unit with instructions for their use.
PICTURE menu
Colour
Colour
16
LED 2400 60 cm (23,6") LED BLU-TV
Picture Mode:
User and Mild.
Note:
Contrast, Brightness, Colour and sharpness
are only available and can be adjusted in the User
mode option in the Picture Mode Settings.
Contrast:
Controls the difference between the
brightest and darkest regions of the picture.
Brightness:
Controls the overall brightness of the
picture.
Colour:
Control the colour.
Sharpness:
Increase this setting to see crisp
edges in the picture; decrease it for soft edges.
Tint:
Controls the tint ( NTSC mode only).
Colour Temperature:
User and Warm.
Red:
Controls the red colour of the picture.
Green:
Controls the green colour of the picture.
Blue:
Controls the blue colour of the picture.
Aspect Ratio:
Zoom2, Just Scan and Panorama.
Noise Reduction:
modes from Off, Low, Middle, High and Default.
Sound Menu
buttons.
Sound Mode: Allows you to select Standard, Music, Movie,
Sports or User. Note: Treble, Bass, Balance can only be
adjusted when set in User mode.
Treble: Controls the relative intensity of higher pitched
sounds
Bass: Controls the relative intensity of lower pitched
sounds
Balance: Controls the volume between the left and right
speaker.
Auto Volume: Controls the TVs volume automatically
when ON is selected
Surround Sound: Turn on / off the surround sound
function by selecting "off" or "surround".
Choose from Standard, Dynamic,
Choose from Medium, Cool,
Choose from Auto,4:3, 16:9, Zoom1,
Choose interference noise