Philips TT3003 Benutzerhandbuch Seite 40

English
40
Problem Possible cause
The safety ring
is dirty.
Solution
If this does not work, place
the appliance on a part of
your body where it is easy
to establish full skin contact,
for example on your lower
arm.Then check if the 'ready
to flash' light works. If the
'ready to flash' light still does
not go on when you place
the appliance on the skin,
contact the Consumer Care
Centre in your country, your
Philips dealer or a Philips
service centre.
Clean the safety
ring carefully. If you are
unable to clean the safety
ring properly, contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre to replace the
flash screen.