Philips TT3003 Benutzerhandbuch Seite 39

Problem
I have switched on
the appliance but I
cannot increase or
decrease the light
intensity.
The 'ready to flash'
light does not go
on when I place the
appliance on the skin.
Possible cause
The adapter is
not inserted
properly into
the wall socket
and/or the
small plug is
not inserted
properly into
the appliance
socket.
The appliance
is broken.
The appliance
has to be
reset.
You have not
put the body
attachment
with safety ring
properly on
the skin.
English
Solution
Make sure the adapter is
inserted properly into the
wall socket and/or the small
plug is inserted properly into
the appliance socket.
Contact the Consumer Care
Centre in your country, your
Philips dealer or a Philips
service centre.
To reset the appliance,
switch off the appliance and
then switch it on again. If
you still cannot adjust the
light intensity, contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre.
Place the appliance at a
90° angle onto the skin in
such a way that all contact
switches touch the skin. Then
check if the 'ready to flash'
light is on and press the flash
button.
39