Hookups; Connecting To Another Device - Sony DVP-FX-870 Bedienungsanleitung

Hookups

Connecting to another device

To switch LINE SELECT (IN/OUT) switch
LINE SELECT IN:
LINE SELECT OUT:Sends the playback signal from this player to a TV.
Notes
• Plug cords securely to prevent noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the mains lead of each component before connecting.
• Connect the player to the TV directly. Image quality may suffer when the video output from the player is
passed through a video deck on to a TV.
Connecting to TV monitor
PHONES AUDIO
OPTICAL
A B OUT
To send the playback signal to a TV or a monitor
1
Set the LINE SELECT switch on the player's right side to "OUT."
38
GB
Input images or audio from an exterior device. The "Line in" message will
be displayed on the LCD screen until the signal from the exterior device
is received.
VIDEO LINE SELECT IN OUT DC IN
9.5V
To AUDIO/VIDEO
Audio/video cord (supplied)
TV or monitor with audio/
video input jacks