Cleaning And Care; Troubleshooting - OK. OPD 420 Gebrauchsanleitung

Size - A5 Size - A5

CLEANING AND CARE

• Unplug the DVD player before cleaning.
• Clean the DVD player with a soft cloth. Never use substances such as alcohol,
chemicals or household cleaners on the DVD player.
• To avoid deformations and color fading, wipe off water drops as soon as possible.

TROUBLESHOOTING

Symptom
No picture or
sound
Picture but
no sound
Sound but no
picture
Poor picture
or sound
BAD DISC
displayed
Remote not
working
Unit not
working
NO DISC
displayed
OPD420_A5_DE_EL_EN_ES_130527.indb 61
Possible Causes and what you should do
• Ensure the power button is on.
• Ensure the power outlet is operational.
• Ensure the power cord is not damaged.
• Ensure the power plug is connected firmly to the outlet.
• Ensure the audio jacks are securely connected.
• Ensure the audio connector is not damaged.
• Ensure the volume is turned up in VOUCH setup.
• Ensure you have set the player's AUDIO settings correctly.
• Ensure you have entered the correct AV input for your TV.
• Ensure the audio is not set to mute.
• Ensure the video jacks are securely connected.
• Ensure you have entered the correct AV input for your TV.
• Ensure the video connector is not damaged.
• Ensure you have set the player's VIDEO settings correctly.
• Ensure you have set the player's AUDIO settings correctly.
• Ensure the disc is not scratched or stained.
• Ensure the AV connector or the output terminal is
not damaged.
• Ensure the disc is not warped, damaged or deformed.
• Ensure the disc is not badly stained or damaged.
• Ensure the disc format is compatible with the player.
• Please check whether you have tried to play a software CD. If so,
please restart the player.
• Make sure the Main units POWER button is on.
• Ensure the remote batteries are working.
• Point the remote control directly at the player's IR sensor.
• Remove any obstacles between the remote and the
IR sensor.
• Turn off the power, and then turn it on again.
• Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or scratched.
61
EN
27/5/13 1:53 PM