AEG DVD 4513 Divx Bedienungsanleitung Seite 26

DESCRIPTION
Front Panel
1. STANDBY/ON
– To switch the standby mode.
2. DISC TRAY
3. OPEN/CLOSE KNOB
– To open or close the disc tray.
4. USB PORT
5. SKIP
– Press to skip to the previous chapter/track.
6. SKIP
– Press to skip to the next chapter/track.
7. STOP
– To stop playing the disc.
8. PLAY/PAUSE
– To start disc playback.
– To interrupt disc playback.
9. STANDBY INDICATOR
10. REMOTE SENSOR
11. DISPLAY
NOTE: To switch the device into standby mode (by using the STANDBY/ON button at the device), keep the STANDBY/
ON button pressed for about 3 seconds.
Rear Panel
1. DIGITAL OUT-COAXIAL
– Connect to audio equipment with digital-coaxial audio
input.
2. 5.1ch Analog audio out jacks.
– Connect to an amplifier with 5.1 ch analog
input jacks.
3. S-VIDEO OUT
– Connect to a TV with SVHS video input.
CAUTION: Do not touch the inner pins of the jacks or the rear panel. Electrostatic discharge may cause permanent
damage the unit.
26
English.p65 26
4. VIDEO OUT
– Connect to a TV with video input.
5. SCART OUT
– Connect to a TV with SCART input.
6. AC POWER CORD
– Connect to a standard AC outlet.
8/27/05, 1:08 PM