Brewing Senseo ® Coffee - Philips Senseo HD7835 Bedienungsanleitung

EnglisH
10
7 Press the on/off button 3.
The light ring around the on/off button lights up to indicate that you
,
have to flush the machine.
8 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time to start the flushing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
The light ring around the on/off button starts flashing to indicate that
,
the flushing cycle has started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
During the flushing cycle, the boiler fills itself with water from the
,
water reservoir and cold water comes out of the coffee spout.
During the flushing cycle, the machine produces more noise than
during a regular brewing cycle.
, When all the water in the water reservoir has been used up, the
flushing cycle is finished and the machine switches off.
9 Clean the coffee spout, the coffee collector and the pod holders with
hot water and some washing-up liquid or in the dishwasher. Clean
the water reservoir thoroughly in hot water, if necessary with some
washing-up liquid, or in the dishwasher.
now your Philips sEnsEO
Note: If the machine does not work, repeat steps 1-8. Do not interrupt the
flushing cycle.
Brewing SENSEO
®
tips for the best sEnsEO
- Use fresh water every time.
- Use the SENSEO
®
Douwe Egberts for your SENSEO
taste. The Douwe Egberts SENSEO
you store them in an airtight storage container.
- To make sure that the coffee always tastes optimally, rinse the pod
holders, the coffee collector and the coffee spout regularly.
- The SENSEO coffee tastes best if you stir it before you drink it.
®
coffee machine is ready for use.
®
coffee
quality
®
coffee pods that have been specially developed by
coffee machine for a full, round
®
coffee pods stay fresh longer if
®