The Child Safety Device; Power Management Function - AEG HKA6325IND Benutzerinformation

10 www.aeg.com
To activate the function or change the
time: touch
the time (00 - 99 minutes). When the
indicator of the cooking zone starts to
flash slowly the time counts down.
To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
To activate the function: touch
Touch or
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
4.8 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
or of the timer to set
. The indicator of
and touch
.
.
of the timer to set the
.
4.9 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
. The
When you deactivate the
hob, you also deactivate this
function.

4.10 The Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
.
hob with
Touch for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
4.11 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
.
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
. Do not set the heat setting.
comes on.
.
. Do not set the heat setting.
comes on.
.
for 4 seconds.
the function
.
.
.