Back Panel; Operation - Skytec 178.403 KA-06 Gebrauchsanleitung

BACK PANEL:

OPERATION:

Connect the passive speaker with a good quality speaker cable to the speaker output connector
(21). WARNING: only connected the original slave speaker on the speaker output terminal!
If required connect an external signal source like a CD-layer to LINE IN (20).
Connect the device with an electric outlet (230VAC / 50Hz)
LINE INPUT (DVD, CD-player etc.):
1. Connect the source (DVD-player, CD-player etc.) to the line input on the rear panel
2. Push the input selector to Audio position.
USB/SD:
1. Push the input selector to USB position.
2. Press PLAY button, MP3 begin to play.
MICROPHONE:
1. Inset the microphone to the MIC1, MIC2, MIC3 jack.
2. Adjust the MIC volume and tone control.
3. Adjust the echo control.
FINAL:
Adjust the master VOLUME
Adjust the master Equalizer (13) to get the right sound
20. Aux input
21. Speaker output
22. Power switch
23. AC (220V-240V) input