Front Panel; Back Panel; Operation - Skytec 178.458 Gebrauchsanleitung

FRONT PANEL:

1. Microphone input jack
2. Microphone volume
3. Microphone echo
4. Previous song
5. MP3 play / pause
6. USB/SD socket
7. Next song
8. EQ adjustment

BACK PANEL:

OPERATION:

Connect the passive speaker with a good quality speaker cable to the speaker output connector
(22). WARNING: only connected the original slave speaker on the speaker output terminal!
If required connect an external signal source like a CD-layer to LINE IN (21).
Connect the device with an electric outlet (230VAC / 50Hz)
LINE INPUT (DVD, CD-player etc.):
1. Connect the source (DVD-player, CD-player etc.) to the line input on the rear panel
2. Slide the SOURCE select switch to DVD position.
9. EQ LED
10. Source selection (AUX / MP3)
11. Master volume
12. Treble adjustment
13. Bass adjustment
14. EQ on / off
15. Guitar volume
16. Guitar input
18. Aux input
19. Speaker output
20. AC 220V–240V input
21. Power button