Filling With Rinse Aid - Siemens se 60a591 Gebrauchsanweisung

Filling with rinse aid

Rinse aid is used in washing mode to
ensure that glasses are sparkling and
utensils are stain-free.
When the appliance is switched on, low
rinse aid level is indicated by "Refill rinse
aid". You can add rinse aid either when the
appliance door is completely open or – for
a more comfortable posture – when the
door is half open.
Open the rinse aid dispenser
pressing the button on the dispenser
cover and open the cover. When the
door is half open, also pull out the
hinged filling aid until it locks into
position.
Add rinse aid slowly and do not overfill.
Adequate rinse aid has been added
when the door is completely open and
the level indicator on the dispenser is
dark and the "Refill rinse aid" display is
no longer lit.
Close the cover on the dispenser until
it "clicks" into position. If required, the
filling aid is automatically re-inserted.
If you would like to add rinse aid at a later
time, you can skip the "Refill rinse aid"
display by pressing the "Acknowledge"
button .
If required, you can change the amount of
rinse aid which is dosed during operation.
Select the Rinse aid dosage option on the
appliance as described in the chapter
"Adjusting the appliance" under "Selecting
options/standard settings".
by
30
rinse–aid control
Fill when door is fully open.
Filling when the door is half open.
Note
Use only rinse aid for domestic
dishwashers. Spilt rinse aid
may result in excessive foam
formation in the next rinse
cycle. Therefore, remove any
spilt rinse aid with a cloth.
en
37