Hitachi CP-X2514WN Bedienungsanleitung Seite 192

I
HDMI
• Type :Digital audio/video connector
• Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz)
Pin Signal
1 T.M.D.S. Data2 +
2 T.M.D.S. Data2 Shield
3 T.M.D.S. Data2 -
4 T.M.D.S. Data1 +
5 T.M.D.S. Data1 Shield
6 T.M.D.S. Data1 -
7 T.M.D.S. Data0 +
J AUDIO IN1, K
Ø3.5 stereo mini jack
• 200 mVrms 47kΩ terminator
AUDIO IN3 L R,
RCA jack x2
• 200 mVrms 47kΩ terminator
P MIC
Ø3.5 mono mini jack
<Low level>
• 2 mVrms, 1kΩ terminator
<High level>
• 20 mVrms, 1kΩ terminator
I
J
M
L
P K
Pin
8 T.M.D.S. Data0 Shield
9 T.M.D.S. Data0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield
12 T.M.D.S. Clock -
13 CEC
14 Reserved(N.C. on device)
AUDIO IN2
M L
Connection to the ports (continued)
O
N
Signal
AUDIO OUT
RCA jack x2
• 200 mVrms 1kΩ output impedance
② ④ ⑥ ⑧ ⑩ ⑫ ⑭
① ③ ⑤ ⑦ ⑨ ⑪ ⑬
Pin Signal
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
N R, L
O
⑯ ⑱
⑮ ⑰ ⑲
5