Monitor Settings Under Windows Xp - Medion MD 20260 Anleitung

Monitor settings under Windows XP

You will make the screen setting in 'Display Properties' in the Windows program under Windows XP. The program
can be started as follows:
 Right mouse-click on the Windows interface (Desktop) and left mouse-click on „Characteristics".
 Double-click on the "Display" icon in "System Control".
Set the resolution under "Screen resolution" ().
You can set the depth of colour (number of the colours represented) under "Colour quality" (). Your TFT
monitor will support a depth of colour of a maximum of 16 million colours, which corresponds to 32 bits or 'Real
Color'.
The image refresh frequency can be set under "Expanded" ().
A Window with the characteristics of your graphics card will appear, according to the configuration of your
computer.
You will be able to set the required value in the "List all modes"
field under "Graphics card". The optimal value lies at 60 HZ
in the case of a TFT monitor.
75 Hz can be set as a maximum.
Important!
You will possibly not receive any images if your setting does not correspond to the values
supported by your display unit.
In this case, reconnect your CRT monitor and set the applicable values in correspondence
with the options specified above under "Display properties".
8
or



(Ill.: Display properties)
Bringing the device into operation
(Ill.: Detail of Display Characteristics)