Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting Maximum Tilt Angles
To select, use the "MODE/ESC" button and choose "t.9" or "t.18" "UP" and "DOWN" buttons cycle
between all available Tilt Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
t.9
t.18
1-in-built Program Mode (continued)
As the unit can be mounted hung under earth trussing, or can sit equally well on a flat surface, pan, tilt
and LED display settings can be reserved to provide correct coverage and ease of use.
Setting Reversed or Normal Pan
To select, use the "MODE/ESC" button and choose "Pan"(normal) or "r Pan" (reversed). "UP" and
"DOWN" buttons cycle between the two settings. Press the "ENTER" button to confirm the chosen
selection
Setting Reversed or Normal Tilt
To select, use the "MODE/ESC" button and choose "t.L" (normal) or "rt.l"(reversed)."UP" and "DOWN"
buttons cycle between the two settings. Press the "ENTER" button to confirm the chosen selection
Setting Reversed or Normal LED Display
To select, use the "MODE/ESC" button and choose "d.s"(normal) or "rd.s"(reversed). "UP" and
"DOWN" buttons cycle between the two settings. Press the "ENTER" button to confirm the chosen
selection
2-Auto Run Mode
One of two Auto Run Sub-modes can be selected with a choice of preset speeds .This mode enables
the unit to act as a Master to other Slave units
Choosing Auto Run Sub-modes
To select, use the "MODE/ESC" button to show "NAFA" or "NASL". "UP" and "DOWN" buttons change
between the two initial options. With the appropriated option selected, use "ENTER" to confirm and the
LED Display with change to: "Fast" (fast) or "SloU" (slow). The unit will then run at the chosen speed
Maximum Pan
90º
180º
15
Werbung
