Led Display - Lightmaxx LIG0009643-000 Bedienungsanleitung

4.2 Menu map
Six distinct operating modes, many with sub-modes, are supported by the unit. To selected use the
"MODE/ESC" button to enter the menu. "UP" and "DOWN" button choose from values available with
the "ENTER" button confirming any selection. After a few seconds, the LED Display will back during
operation until another button is pressed.
4.3 User configurations
Setting Maximum Pan Angles
To select, use the "MODE/ESC" button and choose "PA18", "PA36",or "PA54". "UP" and "DOWN"
buttons cycle between all available Pan Angles. Press the "ENTER" button to confirm the chosen
selection.

LED Display

PA18
PA36
PA54
Setting Maximum Tilt Angles
To select, use the "MODE/ESC" button and choose "t.9" or "t.18" "UP" and "DOWN" buttons cycle
between all available Tilt Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
t.9
t.18
1-in-built Program Mode (continued)
As the unit can be mounted hung under earth trussing, or can sit equally well on a flat surface, pan, tilt
and LED display settings can be reserved to provide correct coverage and ease of use.
Setting Reversed or Normal Pan
To select, use the "MODE/ESC" button and choose "Pan"(normal) or "r Pan" (reversed). "UP" and
"DOWN" buttons cycle between the two settings. Press the "ENTER" button to confirm the chosen
selection
Maximum Pan
180º
360º
540º
Maximum Pan
90º
180º
14