Connecting The Water Supply Hose - Samsung Q1657AT Bedienungsanleitung

Connecting the water supply hose

The water supply hose must be connected to the washing machine at one end and to the water faucet
at the other. Do not stretch the water supply hose. If the hose is too short and replace the hose with a
longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply
intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink's cold water faucet and tighten
it by hand. If necessary, you can reposition the water supply hose at the washing machine end by
loosening the fitting, rotating the hose, and retightening the fitting.
Note:
A-3 SAMSUNG Washing Machine Owner's Instructions
Q1657A-02150J_EN-60724.indd 3
Installing the Washing Machine
The appliance is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
2006-08-03 ｿﾀﾀ・10:29:19