Pettec Antibark Vibra Trainer Bedienungsanleitung Seite 26

Charging the Antibark Spray Trainers
Advance
Fully charge the Antibark Vibra Trainer with the USB charging cable
until a "7"is displayed on the LED screen. As long as the LED indicator
shows a number between "0" and "6", the battery is not fully charged.
0 1
Battery Battery
empty weak
To do this, open the rubber cover on the bottom of the Antibark Vibra
Trainer and insert the USB charging plug into the opening provided.
Then connect the USB port to the adapter and plug the charger into
an electrical outlet. A full charge takes about 1 hour. Alternatively, the
Antibark Vibra Trainer can also be loaded via USB connections from
notebooks, power banks and similar devices.
Important note: The Antibark Vibra Trainer can be charged with any
commercially available USB charger.
26
2 3 4 5 6 7
Battery
full