Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11.2 Upload Scenes to the
1. Choose program 1..4 (function LED must be off).
2. Press Function- Key (LED is on) and choose Fast (1..4) or Slow (5..8).
3. Put on the external DMX scene (Ch.1
4. Save scene by pressing the Audio- Key
5. Repeat from step No.3 until all scenes are stored.
11.3 Exchange data from
1. Connect the Sender- Controller and Receiver- Controller (any number ) via DMX.
2. Put all Controller into the Record- Mode.
3. Press the Function- Key at the Sender- Controller until the LED is on.
4. Press at the Sender- Controller the Fast- and Slow- Keys at the same time.
5. Now the program LED's of all controllers must flash as an chaser.
6. The process is finished when no LED is flashing not any more at the Sender-
Controller (max. 5min).
Was the upload successful the same program LED's are on at all controllers. In case
that this is not the situation there was an upload error. Please repeat than this
procedure once again.
GLP • German Light Products
E
a
s
y
-
O
n
e
E
a
s
y
-
O
n
e
time in 1/10 sec.)
wait until the Rec- LED goes off.
E
a
s
y
-
O
n
e to
E
a
s
y
E
a
s
y
-
O
n
e
E
a
s
y
(V2.2)
-
O
n
e
-
O
n
e
Easy-One
13
Werbung
Kapitel
Inhaltsverzeichnis
