Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Blackout- Key: Stops the running of the program and closes the Shutter.
10 Operation (upload own Programs)
A second way you can use the
external DMX- Controller in it. These programs can afterwards run automatically as
like the 8 preprogrammed programs can do. Possible applications are small clubs,
exhibitions, shows or fairs.
Procedure:
First you make your desired Scenes in any DMX- Controller. Afterwards you can
upload them Scene by Scene to the
must set the Next- Time between the steps. The DMX- Informations for the Strob-
and Blackout function must be uploaded separate from the scenes.
11 Activate the Record- Mode
Press and hold the Function- Key and switch on the controller
5 times.
11.1 Upload Strob and Blackout
1. Put on a scene via DMX with Shutter = "open".
2. Press the Function- Key until the LED goes on.
3. To store this press the Strob- and Blackout- Keys at the same time
the Rec- LED goes on (3sec).
4. Push the Blackout- Key at the Master- Controller (attention: use the same
scene as you did at step No.1, Shutter = "open")
5. Press the Blackout- Key at the
goes on (3 sec).
6. Switch off the Blackout at the Master- Controller.
7. Activate the Strob- Function in the same scene. (Attention: change only the
DMX- Channels with are responsible for the Strob).
8. Press the Strob- Key at the
on (3 sec).
GLP • German Light Products
E
a
s
y
-
O
n
e is to store your own programs from an
E
a
s
y
-
O
n
e
E
a
s
y
-
O
n
e
. With the DMX- Channel 001 you
E
a
s
y
-
O
n
e
.
E
E
a
a
s
s
y
y
-
-
O
O
n
n
e
e Controller
E
a
s
y
-
O
n
e Controller
E
a
s
y
-
O
n
e
(V2.2)
Easy-One
Power LED flashes
wait until the Rec- LED
wait until the Rec- LED goes
wait until
12
Werbung
Kapitel
Inhaltsverzeichnis
