Set Up & Quick Start; Important Information For Set Up; Quick Start - Adam S1X Bedienungsanleitung

2.1

Important information for set up

Acclimation: After having unpacked your loudspeaker, please allow the
system to acclimate to the temperature of the room. Please do not connect
the speaker for approximately an hour.
HQ Cabling: We recommend using high quality cables to guarantee optimal
performance.
Solid stand: It is important to ensure the speakers stand firmly on a solid
ground!
Package: We recommend not to damage the package and to retain it. The
original packaging is the best guarantee for safe transportation (see 7.).
Break-in time: Please note that the loudspeakers will need a few days to
achieve optimum sonic performance.
2.2 Quick start S1X
Before connecting the loudspeakers to your audio components and the
power source make sure that both the loudspeakers and your audio system
is switched off!
a. Set all level controls fully counterclockwise.
b. Connect the loudspeakers with your audio units: Use a XLR cable. The male
plug goes into the loudspeaker, the female plug into your audio component.
c. Check if the specified voltage matches the voltage of the power supply
you use. If this is not the case do not connect the loudspeakers to a power
source! Please contact your local dealer or national distributor.
If the voltages match, connect the loudspeakers via the included power
cables to two AC sockets.
d. Switch on the on/off switches on the back panels of the loudspeakers.
e. Switch on your audio system/your source of music and adjust the volume
carefully.
6
2.
Information For Set Up / Quick Start