Clearaudio CONCEPT MC Bedienungsanleitung Seite 6

6.)
As all parameters have been adjusted at the Clearaudio factory you only need to align the
turntable with the supplied level gauge.
Pic. 5: Alignment of the turntable
Should the bubble of the level-gauge not be in the centre of the black circle, you can achieve
the perfect levelled position by screwing the feet of your
them clock or counter clock wise till you reach the levelled position. Please fix the ideal
position of the spikes by using the lock screw again.
Only if the turntable is in the ideal levelled position you will get the best sound out of your
Concept -
turntable.
Pic. 6: Height adjustment of the feet
8.)
Connect the one side of the supplied external Power supply to the socket on the backside of
Concept
the – turntable and the other side to a live AC outlet. After that connect the
tonearm to your phonostage.
Pic. 7: Connecting the Power supply
Concept
Your - turntable is now completely set up and ready to play.
We wish you a lot of listening pleasure!
Page/ Seite 5
Concept
User manual / Bedienungsanleitung
Concept
– turntable while turning
 clearaudio electronic GmbH 2014
MC
Lock screw