Interconnetion Example 3-Channel-Mode: Stereo System Bridged + Subwoofer - Autotek A55800 Benutzerhandbuch

INTERCONNECTION EXAMPLE 3-Channel Mode: Stereo System bridged + Subwoofer
Split the stereo RCA output (FL or RL) of the headunit with a Y-connector and connect
Split the stereo RCA output (FR or RR) of the headunit with a Y-connector and connect
Speaker
left bridged
4 – 8 Ohms
REFERENCE NOTE
Do not connect loudspeaker cables with the vehicle's chassis. Always ensure the correct polarity
of all connections. The interchange of plus and minus cause total loss of bass playback and could
damage the speakers.
A 5 8 0 0
LINE INPUTS & BASS REMOTE
the jacks with LINE INPUT CH1 / CH3 of the amplifier
the jacks with LINE INPUT CH2 / CH4 of the amplifier
Switch position CH1/2 und CH3/4 = HP oder FULL
MODE = 4 CH
L R
SPEAKER CONNECTIONS
Connect the bass remote controller
and the remote terminal on the amplifier
with the enclosed cable.
Speaker
right bridged
4 – 8 Ohms
2 2
25
Subwoofer
1 – 8 Ohms