Herunterladen Inhalt Inhalt Diese Seite drucken

Description; Features; Installation; Preparation Of The Flash-Tube - EuroLite superstrobe 1500 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal
which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or
local authorities for more information.

DESCRIPTION

Features

Extremely powerful strobe with 1500 watts
• High quality reflector
• Efficient usage of the flashpower
• Elaborate electronics
• Stepless speed adjustment
• Brightness adjustable via rotary dial
• Flash-tube already installed
• Flash-tube 85010403 OMNILUX XOP-15 100V/1500Wblade receptacle already installed
• Low weight

INSTALLATION

Preparation of the flash-tube

All packaging material has to be removed from the flash-tube before taking the device into operation.
Procedure:
Step 1: Unscrew the fixation screws of the protective shield.
Step 2: Remove the protective shield.
Step 3: Remove all packaging material from the flash-tube.
Step 4: Replace the protective shield and tighten the screws.

Rigging

= 45° C must never be exceeded.
a
14/20
00101407.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis