Grundig GRB 2000 USB Bedienungsanleitung Seite 25

CD­MODE
­ _ _______________________________________________________________
Creating­a­track­memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting­and­storing­tracks
1
Press »PROG/MEM« to call up the function.
2
Select the track by pressing
3
Press »PROG/MEM« to save the track.
4 To store more tracks, repeat steps
Playing­back­a­track­memory
1
Start the track memory by pressing »
– Playback begins with the first programmed file or
track.
2
Press »■­MONO/ST.« to end playback.
3
To play the track memory again, press
»PROG/MEM« and afterwards »
Changing­the­track­selection
1
In stop mode, keep pressing »PROG/MEM« until
the number of the track you want to replace appears
in the display.
2
Select the number of the new track by pressing
»DOWN­ « or »UP­
3
Press »PROG/MEM« to save the new track.
Adding­tracks
1
In stop mode, press »PROG/MEM« until the preset
number shown in the display is zero.
2
Select the number of the new track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM« to save the new track.
»DOWN­ « or »UP­
2 to 3.
e
II«.
e
II«.
«.
«.
Deleting­the­track­memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment
or
press »■­MONO/ST.« while programming.
«.
25­
ENGLISH