Programming - Lupine Piko TL Max Bedienungsanleitung

4

Programming

Light levels:
By default, the Piko operates in the 2-step mode, several other light programs are available.
They are very easy to select by simply keeping the button pressed until the button's red LED (or blue LED)
fl ashes once, twice, etc. When taking your fi nger off the button accordingly,
Refer to Programming scheme on p. 28/29
2-step
low
2-step
high
3-step
4-step
3-step
with Flash
(15hz)
3-step
with RVLR
3-step
Eco
26 Piko TL
the setting will be saved.
Runtime Runtime
Piko TL Max Piko TL MiniMax
16 W 1500 lm 1:30 h
1 h
0.3 W 40 lm 80 h
47 h
16 W 1500 lm 1:30 h 1 h
6 W 650 lm 4 h 2:20 h
1:30 h
16 W 1500 lm 1 h
6 W 650 lm 4 h 2:20 h
0.3 W 40 lm 80 h 47 h
16 W 1500 lm 1:30 h 1 h
8 W 800 lm 3 h 1:45 h
3 W 360 lm 8 h 4:45 h
0.3 W 40 lm 80 h
47 h
1:30 h 1 h
16 W 1500 lm
6 W 650 lm 4 h 2:20 h
Flash Flash Flash
16 W 1500 lm 1:30 h 1 h
6 W 650 lm 4 h 2:20 h
RVLR RVLR
RVLR
1:45 h
8 W 800 lm 3 h
4:45 h
3 W 360 lm 8 h
47 h
0.3 W 40 lm 80 h
Default setting
Low start (Low Start):
The lamp will not start at maximum power as by default, but at the lowest stage.
Double click (Dbl Click):
The lamp may only be switched on with a quick double click. Useful for anybody who wants to
avoid that the lamp is switched on accidentally in particular during transport (e. g. in a backpack).
Stealth mode (Stealth):
The discharged battery capacity and battery warning, usually indicated by the button's
LEDs, are partly deactivated. The LED indications will be reduced to a minimum.
Alpine SOS and SOS:
The light will continue with SOS until the battery is empty. The switch will glow pink.
Note: The SOS sign is an emergency signal! Misuse may be prosecuted!
Disorientation Flash 15hz: (3-step Flash)
This mode is extremely irritating and may by no means be misused.
RVLR: (3-step RVLR)
This mode includes an additional slow fl ash mode.
Police-Mode (Special-Mode):
The lamp only lights up, while the button is kept pressed. The lamp stops shining, when you get
off the button. To prevent an activation by mistake, this mode is chosen in a special way. Press
the button 8 times quickly during 2.5 – 3 seconds. To change back to the standard mode, press
the button again 8 times quickly.
4
Piko TL 27