Accessories; Floor Suction Nozzle - Fakir Red Vac Bedienungsanleitung

Floor suction nozzle

Kombined furniture
brush/upholstery nozzle

ACCESSORIES

ATTENTION!
Always switch off the appliance before changing the nozzle.
The floor suction nozzle has a switch (see arrow) which
sets the nozzle for cleaning of either carpets or hard floo-
ring.
You can activate this switch with your foot.
Vacuum-cleaning hard floors: The slider (2) should be on
Standard setting hardfloor/carpet(right stop). For hard
floors with cracks, tiles, etc., the slider (2) must be set on
the symbol "crevice" (left stop).
● the brush element is extended.
Carpeting:
● the brush element is retracted. Set slider on standard
hardfloor/carpet

NOTICE!
Set suction capacity medium to high.
With the furniture brush attachment you can vacuum off
dust from furniture, pictures, window sills, books, etc.
When removing the furniture brush attachment, you can va-
cuum with the upholstery brush off curtains, upholstered fur-
niture, etc.

NOTICE!
Set suction capacity medium.
The crevice nozzle (14) serves to clean hard-to-access pla-
ces, such as deep cracks, corners, recesses, etc.

NOTICE!
Set suction capacity low to medium.
en
11