Fujitsu Futro S550 Betriebsanleitung Seite 57

Do not throw away the rear slot cover plate. If you remove the PCI board again, you
must reinstall the rear slot cover plate due to cooling, fire protection and the EMC
regulations (regulations on electromagnetic compatibility) to be complied with.
► Insert your PCI board on the riser card (1).
► Insert the riser card into the installation opening from the inside and push it in the
direction of the arrow (1) until it perceptibly locks into position.
► Secure the lock with the screw (2) to secure the PCI board.
► Close the casing (see
A26361-K528-Z221-1-7419, edition 3
"Closing the casing", Page
1
2
17).
System expansions
English - 21