Ports On The Device; Connecting External Devices To The Parallel Or Serial Port; Port Settings - Fujitsu Futro S550 Betriebsanleitung

Ports on the device

Interfaces Device, Externaldevices,
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Serial interface, turquoise
Serialinterface
DVI monitor port, blue
Monitorport
Microphone port, light green
Headphones
USB - Universal Serial Bus,
black
UniversalSerialBus
PS/2 mouse port, green
Mouseport PS/2mouseport
Some of the connected devices require special drivers (see the
documentation for the connected device).

Connecting external devices to the parallel or serial port

Serialport Devices Parallelport Parallelport Externaldevices Serialport
External devices can be connected to the parallel or serial port (e.g. a printer or a modem).
► Connect the data cable to the external device.
► Depending on the device, connect the data cable to the parallel port or the serial port.
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.

Port settings

Serialport, Parallelport
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Device drivers, Device drivers
The devices connected to the parallel or serial port require drivers. Your operating
system already includes many drivers. If the required drive is missing, install it. Current
drivers are usually available on the Internet or will be supplied on a data medium.
A26361-K528-Z221-1-7419, edition 3
Headphones port, pink
Microphoneport
Audio input (Line In), light blue
Linein Audioinput
Audio output (Line Out), light green
Lineout Audiooutput
RJ45-LAN port
LANport
PS/2 keyboard port, purple
Keyboardport
Getting started
English - 11