Installing The Pci Board - Fujitsu Futro S550 Betriebsanleitung

System expansions

Installing the PCI board

PCIboard
You can only install PCI boards with a maximum length of 165 mm.
► Make the required settings for the PCI board.
► Open the casing (see "Opening the casing", Page 16).
1
2
3
► Remove the cross-beam (see "Installing the SmartCard reader", Page 18)
► Insert the riser card in its slot (2).
► Refit the cross-beam.
► Loosen the screws (3).
► Remove the rear slot cover plate of the installation opening (4).
20 - English A26361-K528-Z221-1-7419, edition 3