KKT KOLBE BASE Benutzerhandbuch Seite 35

Installation
Fix the upper chimney on the upper chim-
ney bracket by two screws (4x8mm). Then
fix the upper chimney bracket on the wall.
Before fixing the bracket on the wall, you
can decide about the height of the upper
chimney bracket fixing holes for installa-
tion.
Finally, attach the outer shaft with 2x ST4
(8 mm) screws to the hood body.
Place the tray on the hood. Fasten the
lower chimney bracket to the wall with 2
screws (4 mm x 30 mm).
Schraube
ST4 x 8 mm
Schraube
ST4 x 8 mm
35 35