Noxon A540 Bedienungsanleitung Seite 55

Setting up the wireless connection on the NOXON
While still in its factory default state, the NOXON will start the configuration wizard to
complete the integration in your network.
SSID
Your WiFi network
WiFi network of your neigh...
[Rescan]
[Wired]
[Manual config]
Please select "your" network now. If the network you are looking for does not appear, you
can repeat the search via the [Rescan] menu item. Perhaps your NOXON A540 is simply
too far away from the router, or there are too many walls and other obstacles between
the two devices? Go ahead and place the NOXON right next to the router to eliminate
distance as a possible source of errors.
If at this point, you decide that you would rather connect your radio to the router, select
the menu item [Wired].
After successfully selecting the network you have to enter the network password. At
least, you have to if you have encrypted your WLAN router properly. We'd like to take this
opportunity to urgently recommend that you do just that. But back to the matter at hand.
Key:
0123456789. _ @,
abcdefghijklmn
opqrstuvwxyz
ABC
DEFGHIJKLMNOPQR
If you accidentally type in the wrong thing, use the field [BKSP] (for backspace). When
you have finished entering the password, go to the [OK] field. Please do not confirm each
letter using [OK], as this would cancel the input.
After you confirm using the OK button, the NOXON A540 sends the password to the
router ("Please wait" appears on the screen), which – if the password is correct – logs on
the A540 (indicated on the display with "Connected").
It starts listing for you all networks it has found.
Your network should be among them. This looks
something like this.
Enter the password for your WLAN router via the
navigation dial: turn the dial to select the letters
and numbers, and press the dial to confirm the
entry. You can find the special characters by scroll-
BKSP
ing further using the dial.
OK
CANCEL
55