Footswitch Operation - Chauvet GigBAR IRC Bedienungsanleitung

Footswitch Operation

Pedal
1
(Auto)
2
(Sound)
3
(Color)
4
(Blackout)
Page 30 of 156
The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the GigBAR™ IRC microphone.
To use the footswitch:
1. Connect the GigBAR™ IRC to power.
2. Raise the wireless antennas located on the GigBAR™ IRC and the footswitch.
3. Press pedal #1 (Auto) to activate Auto program controls. When working, all the lights will
begin in Auto mode (AM01).
4. Use the chart below to activate the desired function.
Sub-option
Auto mode Pars, derby lights, laser and strobes
1 x press
(AM01)
2 x press AP01
3 x press AP02
4 x press AK01
5 x press AL01
6 x press APK1
7 x press
APL1
8 x press AKL1
9 x press APKL
10 x press AKLS
Sound mode Pars, derby lights, laser and strobes
1 x press
(SM01)
2 x press SP01
3 x press SP02
4 x press SK01
5 x press SL01
6 x press SPK1
7 x press SPL1
8 x press SKL1
9 x press SPKL
10 x press SKLS
1 x press Red without laser, no strobe
2 x press Green without laser, no strobe
3 x press Blue without laser, no strobe
4 x press Yellow without laser, no strobe
5 x press Cyan without laser, no strobe
6 x press Pink without laser, no strobe
7 x press White without laser, no strobe
8 x press Red with laser, no strobe
9 x press Green with laser, no strobe
10 x press Blue with laser, no strobe
11 x press Yellow with laser, no strobe
12 x press Cyan with laser, no strobe
13 x press Pink with laser, no strobe
14 x press White with laser, no strobe
N/A Immediately turns OFF all the light fixtures
The GigBAR™ IRC footswitch will work properly in any mode, with a maximum unobstructed
distance of 100 ft (30.5 m). You must turn on the Wi-Fi™ on the GigBAR™ IRC before using the
footswitch.
Function
See Menu Map
description
See Menu Map
description
GigBAR™ IRC User Manual Rev. 7
for
for