System Settings; Default Pod Arrangement; Examples Of Pod Order Rearrangement - Chauvet GigBAR IRC Bedienungsanleitung

System
Settings
Default Pod
Arrangement
Examples of
Pod Order
Rearrangement
Page 24 of 156
To restore factory default settings, or make changes to individual pod settings, follow the
directions below.
1. Press <MENU> repeatedly until SyS blinks on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select rSEt (factory default) or dSET (changes pod
arrangement).
4. Press <ENTER> to select the desired system setting.
If rSEt is selected, GigBAR™ IRC is restored to factory default settings.
Pod 4
If dSEt is selected, change the order of the pods by using the
steps and examples below to arrange the order of the pods:
·
Use <UP> to move right on the display.
·
Use <DOWN> to change the digit value (1, 2, 3, or 4).
·
Press <ENTER> to confirm.
·
Repeat until all 4 pods are arranged as desired.
Pod 2
Pod 3
Pod 3
Pod 3
Pod 4
Ex. 1
Pod 4
Ex. 2
Pod 2
Pod 1
Move Right
· *234
· 12*4
Pod 1
Pod 2
Pod 1
GigBAR™ IRC User Manual Rev. 7
· 1*34
Pick a Digit
· 123*
1, 2, 3, or 4