Antenna Connections - Clatronic CTV 805 DVB-T Bedienungsanleitung

Connecting other Playback Devices

Antenna connections

Switching on the player (Fig. 1/1)
48
05_CTV805_GB.indd 48
Digital
Connect the Coaxial cable for transmission of digital Audio signals to your play-
back device or your amplifier.
1. Insert the audio plug into the socket on the right-hand side of the device
(Fig. 1/7).
2. Plug the Audio jack into the corresponding socket on your playback device or
your amplifier.
In order to play back the picture from another playback device (e.g. digital
camera) on the LCD screen, connect the audio/video cable to the AV IN socket
(Fig. 1/18) and the other end to the playback device. Turn the AV OUT switch
(Fig. 1/21) on the device to IN in order to turn the device to AV IN operation.
Antenna Input (Fig. 1/16)

NOTE:
Please ensure that it is possible to receive DVB-T signals in your area. Informa-
tion on the transmission area is available on the Internet under:
http://www.ueberallfernsehen.de, or from your specialist dealer.
This device has a built-in DVB-T receiver.
In order to be able to receive digital terrestrial channels with the built-in DVB-T
receiver it is necessary to connect your permanently installed house aerial.
If you are located in the central section of the transmission area you can also use
an optional passive or active DVB-T aerial.
• Connect the cable from your DVB-T aerial system or your DVB-T room aerial
to the ANT. Socket on the left-hand side of the device.
Turn on the main switch of the DVD player by moving the „POWER ON/OFF"
switch on the left-hand side of the device to the „ON" position.
26.01.2010 9:32:40 Uhr
T
C