Understanding
the menu structure
Using the menu
Overview of the main menu
System settings
56
05_CTV805_GB.indd 56
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found under each
of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 2/8) ( / ) on the remote control to browse
through the main menu.
In contrast to this, you must use the Cursor Buttons (/) to move in the
sub-menu.
Select a menu option with the ENTER-button (Fig. 2/7).
Use the ENTER-button also to select an option (e.g. "PAL" in the illustration
on the left). The selected option (in the example „PAL") is now highlighted.
Slide control
In many menus you will find slide controls to adjust e.g. the volume or the bright-
ness of the screen. The slide control is used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons (/).
3. Confirm the entry with the ENTER-button.
General Setup (1)
Audio Setup Page (2)
Dolby Digital Settings (3)
Preference Page (4)
Password Setup Page (5)
DVB-T Settings (6)
NOTE:
Some of the menu settings are only available in stop mode (depending on the
DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the TV-aspect
will be 4:3. However, most feature films have an aspect of 16:9, the image is
therefore too wide for the TV-screen.
Here you can specify how the replay of the film is to be adapted to the playback
device:
4:3 Panscan: You will only see the middle section of the film. The borders will
be cut off.
26.01.2010 9:32:46 Uhr