Instruction for use TOGU Jumpstep
Congratulations!
You are now the owner of TOGU Jumpstep, a product "made in Germany".
This sports tool was produced in compliance with valid EU norms. It is free of forbidden
phthalates and heavy metals.
Warning:
Avoid storage in direct sunlight or near heat sources, because otherwise TOGU Jumpstep
might deform
Avoid contact with sharp and pointed objects (e.g. broken glass, pointed rocks in shoe
soles) because they can damage TOGU Jumpstep.
Do not throw TOGU Jumpstep.
Use sport shoes, regular shoes or be barefoot while training on TOGU Jumpstep.
Prior to any use, TOGU Jumpstep should be checked for damage because otherwise a
safe handling is not guaranteed
TOGU Jumpstep has to rest on a horizontal, stable and dry ground.
Equipment details:
The TOGU Jumpstep is made of high grade Ruton with a needle valve and 8 times glued plate
made of birch wood.
Jumpstep
Size: ca. 78 x 78 x 27 cm
Load: ca. 150 kg
Care:
Use water or mild standard detergents and disinfectants for cleaning the ball. Dissolvers as well
as acidic or corrosive cleansers can harm the material. TOGU Jumpstep always store dry.
How to inflate:
The air filling of TOGU Jumpstep can be regulated by using the attached original TOGU ball
pump. Also Available as spare part in retail. Therefore the TOGU Jumpstep is equipped with a
needle valve.
Please perform changes to the air pressure inside TOGU Jumpstep (inflation or bleeding) only, if
the TOGU Jumpstep has room temperature and add at the most as much air, as is necessary to
make the surface level. Always moisten the needle before carefully inserting into the needle
valve.
Please note whilst pumping that the diameter of the four small balls shall not be larger than 7cm,
otherwise the ball will deform. Recommended diameter of the balls is 5 to 7 cm.
Recommended max. height of the large ball on the plate is 18 cm. Total height of product is max.
27cm.
Important: Moisten the needle and insert the needle
straight and carefully into the valve.
© TOGU GmbH
Info
www.togu.de
Service Nr: +49 (0) 8051 9038-0