General Operation - Clatronic BSS 7013 Bedienungsanleitung

NOTE:
• When not using the system for a long period of time, charge the battery at least
every 6 to 12 weeks. Even if switched off, the battery continues to discharge.
Turning the Device On / Off
• Slide the switch on the bottom of the device to the ON position. A melody can be
heard. The device powers up in lamp mode with the brightness level "off".
• To turn the device off, slide the switch on the bottom to the OFF position.
To save the battery, switch off the speaker when not in use.
Select Operating Mode
• To use the device in BT mode, press the M button after having turned it on. You
will hear a prompt tone, and the indicator light (9) will flash in blue.
• Press the M button repeatedly to toggle between the "Bluetooth", "AUX" and
"Memory Card" mode.
NOTE:
• The AUX and CARD modes can only be selected if an audio cable is connected
and / or a memory card is inserted.
• If you press the M button, Bluetooth playback will be stopped and will have to be
started again manually.
• If you connect a cable to the AUX socket, the device will automatically switch
into AUX mode.
• If you insert a microSD card into the card reader, the device will automatically
switch into CARD mode.
Volume
Press and hold the
as desired.
NOTE:
• When the maximum volume of the loudspeakers is reached, a beep tone is
played shortly.
• The volume on the playback unit must not be set too low, otherwise static may
occur.
44
BSS7013_IM_CTC

General Operation

button or the button in order to adjust the volume
18.10.17