General Operation - Clatronic BSS 7014 Bedienungsanleitung

NOTE:
• During music playback:
When the battery power is low, a warning signal will
sound intermittently.
• Light:
If the battery is low, the intensity of the light decreases
and eventually turns off completely.
• When not using the system for a long period of time,
charge the battery at least every 6 to 12 weeks. Even if
switched off, the battery continues to discharge.

General Operation

Turning the Device On
Press the button. The device starts in Bluetooth mode. This
takes a few seconds. Then, the device plays back a melody
and the indicator light flashes blue. The device starts up with
the volume set by the manufacturer.
Turning the Device into Standby Mode
To turn the device into standby mode, press the button
again. The light is not turned off.
Turn the speaker into standby mode if you do not want to use
it and deactivate the light to save battery power.
NOTE:
After about 5 minutes without a signal, the device will auto­
matically switch to standby. The light will stay on, however.
Volume
Press the respective button again to adjust the volume as
desired.
- Button = Reduce volume
- Button = Increase volume
NOTE:
• Every press of a button activates the light shortly to give
feedback ­ even if the light is not turned on.
• When the maximum volume of the loudspeakers is
reached, a beep tone is played shortly.
• The volume on the playback device must not be set too
low, otherwise static may occur.
Sound Settings
If necessary, change the EQ setting in your playback device
to create the best sound.
Light
You can turn on the light at any time. It does not matter if the
device is in Bluetooth mode or not.
Below are the available light options:
22
BSS7014_IM_CTC
Button Function
Press this button to turn the light on or off.
Every number button selects a different mood
light. Only with these colours, you can change
1 – 7
the brightness individually with the buttons
and .
NOTE:
During the following operations, the device
switches back to the factory preset brightness:
- At every colour change.
- Turning the light off and on again.
- If the buttons
during music playback.
Press the button to change to the next mood
colour light.
Activates the "candlelight" function.
FLASH Flashing colour change (all mood light colours).
STROBE Current mood light starts flashing.
Mood light colour changes from "weak" to
FADE "strong" and back to "weak". Then, the devices
changes to the next colour.
Smooth colour change between the different
SMOOTH
mood light colours.
Automatic colour change between the different
mood light colours.
NOTE:
The colour intensity is depended on the volume
selected on the music playback device. Please
select a higher volume on your music playback
device and then use the speaker to select the
desired volume.
Bluetooth Music Playback
Bluetooth involves a technology for wireless radio connection
of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN­networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth­ena­
bled device. The functional radius is limited to approx. 15 me­
tres depending on the surroundings and the device used.
In order to transfer music wirelessly, your player must support
the A2DP profile (Advanced Audio Distribution Profile). To be
able to remotely control the source, the playback device must
support the AVRCP profile (Audio Video Remote Control Pro­
file. Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
, , , , are pressed
02.11.17