Rotating Input Select Switches - Denon DN-X100 Bedienungsanleitung

ENGLISH
6

ROTATING INPUT SELECT SWITCHES

1. Disconnect the power.
2. Remove knobs from the Top Panel.
3. Remove the 6 screws attaching the Top Panel.
4. Remove the 2 screws attaching the Switch unit.
5. Rotate the Switch unit to the desired location.
6. Reinstall the 2 screws holding the Switch unit.
7. Reinstall the Top Panel and reattach knobs.
10
(For RCA PINJACK)
(For BALANCED MASTER OUT)
Switch unit
(For BALANCED MASTER OUT)
2=Hot
About the Cables
Cable 1
Balanced
Cable 2
Sleeve=GND
Ring=Cold
Tip=Hot
(For MIC)
Balanced (1/4" TRS)
Cable 3
Sleeve=GND
Ring=Cold
Tip=Hot
1=GND
Balanced
Cable 4
XLR3-12C
3=Cold
RCA pin plug
Unbalanced
Balanced (1/4" TS)
Sleeve=GND
Ring=Cold
Tip=Hot
1=GND
Balanced
2=Hot
XLR3-11C
3=Cold
Balanced (1/4" TRS)
Sleeve=GND
Ring=Cold
Tip=Hot