LevelOne KVM-0306 Handbuch Seite 7

4.2.1 PCs Selection
Hot Key:
[Scroll] → [Scroll] → [ 1 ] → [Enter] or
[Scroll] → [Scroll] → [ 2 ] → [Enter] or
[Scroll] → [Scroll] → [ 3 ] → [Enter]
You can synchronize the PC selection, by using the following two-step Hot Key
sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice
(Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to assign the PC to a
particular PC. (If you press key [1] or [2] or [3] on the number pad, the keyboard,
mouse & video will also be switched synchronously)
4.2.2 Auto-Scan Function
Hot Key:
[Scroll] → [Scroll] → [S] → [Enter] to BEGIN.
[Scroll] → [Scroll] → [S], → [Enter] to STOP.
You can activate the Auto-Scan function by using the following two-step Hot Key
sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice
(Step 1), then press [S] and then press [Enter] (Step 2). When you press the
Auto-Scan hot key sequence, the DVI KVM Switch alternates between the three PCs
and displays them on the monitor.